Mounting Fim Optically Clear

RECOMMENDED APPLICATIONS

Additional Specifications

• Description:Catalina Graphic Films’ Mojave Mounting Films converts non-pressure sensitive films—such as membrane switches, posters, mouse-pads, decals and medical applications—into pressure sensitive materials.
• Application:These products are intended for mounting substrates and signage such as styrene, rigid vinyl, polyester, acrylic and polycarbonates.
• Face Film:1.0 mil. Clear Polyester
• Adhesive:P82 clear acrylic pressure activated permanent
  R32 clear acrylic pressure sensitive removable
• Liner:40# (3.0 ± 0.2mils) white super calendered paper coated-silicone coated on both sides
• Opacity:Clear
• Indoor Durability:Up to 3 Years
• Total Product Thickness:6.0 ±0.2 mils
• Minimum Application Temperature:+40º F
• Service Temperature Range:-20° F to +150° F
• Water Resistance:Excellent: test piece (with vinyl face film applied) ages 24 hrs. applied to stainless steel is not affected when immersed in 70ºF water for seven days
• Solvent Resistance:Good for most petroleum based solvents. Ultimate resistance to solvents is highly dependent on the face film or substrate used. Edge sealing is recommended in high solvent exposure areas
• Shelf Life:One year when stored at 70°F and 50% relative humidity.